Hollyland Lark C1 Wireless Microphone System Overview
As I mentioned the microphone system actually comes in a very nice charging case. This case has LED indicators on the front to let you know how charged it is as well as the devices inside. The case has a 1400 mAh battery inside, which will charge the included microphones 3 times over if they are dead. On the bottom of the charging case is a Type-C connector to use with the included cable.
The top part of the charging case opens up and inside you’ll find the two microphone’s and wireless receiver.
Starting with the receiver it is quite small and is made it plug right into the bottom of your iPhone via the Lightning connections. There are two indication LED’s (TX1 & TX2), which will let you know you have a good connection with the microphones. On one end there is another Lightning connection so you can still charge your iPhone while using it. On the bottom there is a connection button, but you likely won’t ever have to use it.
Taking a look at the microphone’s they are quite small and weigh in at only 0.25 oz each! Towards the top of each is your actual microphone, which has omnidirectional polar pattern and frequency range of 20Hz–20KHz. On the front you’ll find an indication LED that will let you know the microphone is connected to the receiver. There is a power button and connection button on one side, and on the bottom is a USB-C connection for charging outside of the charging case. There is a simple clip on each microphone, which make it easy to attach to a shirt etc. Obviously missing from these microphone’s is an actual microphone connection if you wanted to connect a lavalier microphone.
