Installation
To start off with installation we will be installing our motherboard, which goes in no problem at all. There is ample space both above and below the board once it is installed, which is nice as some smaller cases have a really snug fit.
For storage we are going to be installing a single 2.5-inch solid state drive. Simple remove the SSD tray and install your drive, then easily reinstall the tray, it is that simple!
MSI was nice enough to hook us up with the white version of their MPG A750GF power supply which is going to match this case perfectly. This power supply is completely modular, has an 80PLUS Gold rating, and even comes with white cables!
It easily slides in from the backside of the case.
The last thing we need to install is our graphics card. Our graphics card is pretty short, but even if you have a longer graphics card you’ll be fine as this case supports graphics cards up to 340mm.
The last thing you are going to want to do is wire everything up and organize your cables. We were able to hide most of our cables in the the bottom section of the case and the included Velcro ties helped route our cables pretty well. On the main side of the case we have an extremely clean build!
