ADATA XPG Lancer RGB DDR5-6000 32GB Memory Kit Review


The easiest way to overclock on the Intel platform is to simply change the frequency divider in the BIOS. To achieve the best overclock we try to stay with the timings that the XMP profile recommends. If we run into any issues we will bump up the voltage to see if we can get our system to boot and become stable.

The XMP profile puts this kit at 6000 MHz and we were actually able to just change the frequency divider to 6400 without have to change the timings or voltage. That is pretty impressive considering this kit is already running at 6000 MHz. This turned out to be a very stable overclock.

xpg lancer rgb oc1

Here are a couple tests using running the kit at 6400 MHz…

xpg lancer rgb ddr5 sandra overall oc

xpg lancer rgb ddr5 3dmarktime oc

About Author