Enermax iVektor Overview
For a full video overview of the iVektor be sure to check out our video below.
The iVektor has a pretty interesting design to it. As I said we received the black version of the case, but it also comes in red and white. The soft touch coating on the case gives it a pretty cool feel.
Looking at the front of the case one thing that I really liked is that Enermax has designed the case so the three 5.25-inch drives are not really visible. This gives the front of the case a very sleek look to it. Moving down from the three 5.25-inch drive bays there is a large ventilated section. Enermax has included a single 120 mm intake fan, but you can actually fit two here. There is also a small Enermax logo towards the bottom of the case.
On the top of the case is where you are going to find all of your front panel connections and buttons. There are rather large power and reset buttons, two USB 3.0 ports, two USB 2.0 ports, audio connections and a fan controller. The fan controller has high, medium and low settings. The rest of the top of the case has a ventilated section much like on the front of the case. The top of the case can house two 120 mm fans or a 240 mm radiator.
On the side of the case is a large window that will show off your installed hardware. Looking at the bottom of the case we can see that the case is lifted off the ground by 4 large feet and there are filters that are removable for easy cleaning.
Looking at the back of the case the first thing that caught my attention was that the handle on the side panel window was broken. The case came in pretty good condition so I was surprised to see the handle broken. The back of the case is also where you will find the second included 120 mm fan. There are also water cooling holes, all of your expansion slots and you can see that your power supply will be mounted on the bottom of the case.