The Tower 100
If you are not familiar with The Tower 100 mini-ITX case many people have described the design as a popcorn machine and you can definitely see that. I would also say it looks a lot like a 3D printer. In any case the official dimensions of the case are 462.8 x 266 x 266 mm. As far as the “Racing Green” color goes it is a darker green and I don’t think I’ve ever seen a case that has used this color before.
At the front of the case there is a one of the three tempered glass panels. This panel is the largest and allows you to see everything that will be installed in the top compartment of the case. At the top left corner of the case you’ll find your buttons and connections. There are LEDs for power and hard drive activity, a large power button, smaller reset button, audio jacks, two USB 3.0 ports, and a USB 3.2 gen 2 Type-C port.
The top of the case is completely ventilated and has an integrated filter. Pressing down on it, it will release and reveal a 120 mm cooling fan.
Both sides of the case are very much identical with with a panel that is split between tempered glass and ventilation with an integrated filter. There is also ventilation towards the bottom of the case.
The rear of the case features a large ventilated section with a magnetic removable filter. Behind the filter is another 120 mm fan. Toward the bottom of the case is your power supply mount. At the bottom of the case is a filter that pulls out from the rear of a case.
