AZZA Hurricane RGB Fans Overview
Taking a look at the AZZA Hurricane fans they have a little bit of a different look than other RGB fans we’ve taken a look at. First off these fans have a circular frame which is white and then has a clear diffuser on top of that. This is actually the section of the fan which will be illuminated with RGB lighting.
Around the frame you’ll find four corner pieces which is where you will find your mounting points. These have rubber on them to cut down on vibration and noise. The fins of these fans are black, which is what you want since the fins will not be illuminated. The fins also have little snowflakes on them, a cool little touch.
Coming off each fan are two cables, one is a 4-pin PWM cable and the other is a standard 4-pin PWM cable with both female and male connections. I believe this will allow you to daisy-chain these fans if you plan to control them with your motherboards RGB software.
So a little bit of information on these fans themselves they are 120 mm fans with a Fluid Dynamic Bearing. They run between 800-1800 RPM with a max airflow of 56.12 CFM, max air pressure of 1.79 mm-H2O, and max noise level of 29.8 dB(A).