Boogie Bug Dub Style M Custom Case Review

Getting Inside
To get into the case is very simple; the side panel is split into 2 doors. You need to remove 2 thumbscrews on each door to open them, once you have done so they will easily slide open up. Not only is the outside of the case all chrome, but the inside is too. The inside of the case is basically split into 2 parts, motherboard and components and optical and hard drives.

Boogie Bug Dub Style M Custom Case Boogie Bug Dub Style M Custom Case

The hard drive cage is quite interesting, we will see why during our installation. The hard drive cage will hold up to 4 hard drives. Above the hard drive cage is where your optical drive will go. The top 2 have easy-install thumbscrews, so they are tool-less, the bottom 2 you will have to use screws with.

Boogie Bug Dub Style M Custom Case Boogie Bug Dub Style M Custom Case

Boogie Bug has taken out Zalman’s typical exhaust fan and put theirs in there. It is a blue LED fan with a black casing. It is connected to the fan controller that is in the first PCI slot on the back of the case. If you have more than 4 hard drives there are 2 more spots for them on the bottom of the case. This is the first time I have seen something like this and it is very innovative.

Boogie Bug Dub Style M Custom Case Boogie Bug Dub Style M Custom Case

Also inside of the case were 2 Boogie Bug bags, one had a t-shirt inside and the other had all of your accessories and installation hardware. You get an installation manual, mounting screws, allen bots, an allen key, 2 fan controllers, 2 cable organizers, and a 3pin cable splitter.

Boogie Bug Dub Style M Custom Case Boogie Bug Dub Style M Custom Case

About Author