Project Name: Project Rhino
About this mod / project:
Hello guys! Ever since finishing the R40 Engineering Station I have had an itch to start a new project, so I will cut straight to it. The case I will be building in this time is a prototype of the upcoming HEX GEAR R80, a full size ATX case with plenty of space for a LOT of hardware, as I will do my best to prove.
This build proves as a “test build” in the prototype case to make sure that it has the thermal capacity, and space that is needed for an ultra high-end build. And what better way to do this than to cram all sorts of expensive, powerhungry and hot hardware into it!
I will be keeping this build very clean, as it serves as a statement of what you can do with basic tools in this case (so not crazy water distributing plates, sorry!)
I would also like to give a huge thanks to the sponsors that has provided parts for this project, and helped make it one of the most powerfull PC’s possible to build. I would also like to thank the team from Official Nordster for the Rhino artwork in the banner.
Photos:





















Hardware:
Case: HEX GEAR R80
CPU: Intel i7 5960X
Graphic cards: 4 x Nvidia Geforce GTX Titan X
OS drive: Intel 750 ssd 1.2TB PCIe
Secondary drive: KLEVV Urbane 480 gb ssd
Motherboard: ASUS X99-E WS
RAM: 64 GB KLEVV CRASS DDR4 ram
PSU: Corsair AX1500i
Fan controller: Aquaero 6
Watercooling: EK blocks, radiators, reservoir & pumps
Fans: EK vardar
Fittings: Bitspower
Sleeving: E22
Tubing: E22 solid tubing
Mods:
– Custom mounts for pumps and res
– Custom sleeved wiring everywhere!
– Cable combs installed
– Custom hard tubing
– Custom water cooling loop
Build Log: LinusTechTips
Builder: p0Pe