Overclocking the KLEVV URBANE V RGB DDR5-7600 32GB Memory Kit
The easiest way to overclock on the Intel platform is to simply change the frequency divider in the BIOS. To achieve the best overclock we try to stay with the timings that the XMP profile recommends. If we run into any issues we will bump up the voltage to see if we can get our system to boot and become stable.
The XMP profile puts this kit at 7600 MHz. We were able to get the memory up to 7933 MHz by simply increasing the frequency. Anything over 8000 MHz and the kit would was not stable, even after we increased the voltage.
