A Look Inside
To get inside the case you simply remove the four thumbscrews on the side panel. With it removed we can see we have a pretty standard 2 compartment design. As far as motherboard support goes this case will support mini-ITX, micro-ATX, and ATX motherboards.
As we move towards the front of the case there is a distinct routing channel the cables coming from your motherboard. Also towards the front there are two SSD mounts. In between them there is a cable cover to keep things looking clean if you do decide to install drives here.
Separating the top and bottom of the case is a full-length power supply cover. There is a cut-out in the front if you did plan on installing a radiator up front. The top of the cover is ventilated and there are three cable routing holes built-in.
Removing the opposite side panel you’ll notice that it does have sound dampening material installed on it. With it removed we can get a better look at the rest of the case.
The first thing that caught my attention was that be quiet! has installed a PCB on the removable SSD mount that is on the motherboard tray. This PCB is a PWM fan and ARGB hub / controller. It can support up to six devices and is powered by a SATA connection. All four of the included Light Wings fans are wired to this device. Since it is installed in the SSD mount, you do lose the ability to install a drive here, so the mount now only supports a single drive.
In the bottom of the case is where you’ll of course install your power supply and there is also a removable hard drive cage. This cage will support two 3.5-inch hard drives or a single 3.5-inch drive. So out of the box this case supports 5 drives.
