InWin was nice enough to send over their Mercury AM120S RGB fans with this case. To get these installed in the bottom of the case we flip it over and have to remove one side of the case feet. With the fans installed the cable routing holes towards the bottom of the motherboard tray are going to be very hard to reach, so make sure you route all of your cables before you get these installed.
InWin also sent over their BR24 liquid CPU cooler. This is a 240mm all-in-one liquid CPU cooler. To get this installed you’ll need to “drop” your power supply, but you don’t need to fully remove it. With the RGB fans and the BR24 installed the build lights up quite nicely. I would definitely suggest picking up some RGB fans or RGB strip to light up the inside of the case as the side panel is tinted.
If you were wondering about the performance of the cooler you can see it does quite well…